PTH 500
PTH 500
GREENLINE Chippers Power take off tractor
The smaller model of the 660 series of Pezzolato drum chippers.
This particular machine is ideal for those who produce wood chips as fuel for domestic heating systems, for agricultural tourism, hotels, greenhouses, schools, or for those who simply need to reduce the debris from pruning.
It can be fed manually or using a mechanical loader.
The entry of material is facilitated by a feed conveyor inside the hopper (on request a second feed conveyor can be supplied for the hopper tipper).
The combined action of the belt and upper roller facilitates the introduction of bulk material, even using mechanical loaders.
Routine maintenance and the replacement of knives can be perfermed extremely quickly and easily thanks to the “total” lifting of the feed roller.
| TECHNICAL DATA | PTH 500 | ||
|---|---|---|---|
| Minimum tractor power | hp/kW | 80/60 | |
| Maximum power of the tractor | hp/kW | 150/112 | |
| Max chipping diameter soft wood | mm/in | 400 mm / 15.75'' | |
| Max chipping diameter hard wood | mm/in | 300 mm / 11.81'' | |
| Maximum inlet passage | mm/in | 500 x 400 mm / 19.69 x 15.75'' | |
| Knives | n° | 2 | |
| Hourly throughoutput | m³/h | 20 ÷ 30 | |
| Drum diameter | mm/in | 660 mm / 25.98'' | |
| Drum width | mm/in | 480 mm / 18.90'' | |
| Hooked steel feeding conveyor width | mm/in | 500 mm / 19.69'' | |
| Hooked steel feeding conveyor lenght | mm/in | 550 mm / 21.65'' | |
| Weight | kg/lbs | 3200 kg / 7055 lbs |
GALLERY
Driven by PTO tractor, 130 Hp power
Driven by PTO tractor, 135 Hp power
Driven by PTO tractor, 100 Hp power
Driven by PTO tractor, 160 Hp power
Driven by PTO tractor, 130 Hp power
EXTRAS AND CONFIGURATIONS
PULLEY-BELT DEVICE
Pulley-belt device between cardan shaft and drum, lowering the height of the cardan at 60 cm from the ground
HYDRAULIC TRACTION
Hydraulic traction, to easily move the machine in impervious paths
HOPPER WITH FEEDING CHAIN
Hopper with feeding chain, hydraulic drive, to increase the aggressiveness of the machine feeding.
DISCHARGE BELT
Discharge belt, to obtain betterquality chips
SECURITY BAR
Removable security bar, for hand feeding
Electronic controller with 5" "touch screen" panel
FORESTRY CRANES
Forestry cranes, with or without cabin, in customised configuration
HOPPER EXTENSION
Hydraulically folding hopper extension, to easily introduce certain types of wood
RADIO OR CABLE REMOTE CONTROL
Radio or cable remote control, to manage the chipper's main activities at a distance
LOW-OR HIGH-SPEED TOWING TRAILER
Low- or high-speed towing trailer, with air or hydraulic brakes
C-SHAPED WOOD-SPLITTER
C-shaped wood-splitter with or without chain saw
SIEVING GRIDS
Sieving grids for chip calibration with different sizes, easy to replace
Other extras and configurations
- HYDRAULIC ORIENTATION DISCHARGE TUBE
Hydraulic orientation (deflector rotation and direction) discharge tube
- TELESCOPIC LEGS
Telescopic legs enable transportation of the chipping unit on several vehicles
- Wear–resistant Hardox metal sheets for discharging fan
- INTEGRATED CONTAINER
Integrated container, with hydraulic pivoting, to collect chips where there is difficult access for other vehicles
- CHARGING ROLLERS
Charging rollers to ease the introduction of certain types of wood for stationary machines
- NO STRESS ELECTRONIC DEVICE
NO STRESS electronic device, available on all standard machines, automatically regulating the in-feed of material according to the available power
- HOOK-LIFT SYSTEM
Hook-lift system
INFORMATION REQUEST
80 hp / 60 kW Minimum required tractor power
400 mm / 15.75'' Maximum chipping diameter
500 x 400 mm / 19.69 x 15.75'' Maximum inlet passage
DO YOU NOT KNOW WHICH MODEL IS SUITABLE FOR YOUR NEEDS?
REQUEST A COMMERCIAL SUPPORT TO IDENTIFY THE MOST SUITABLE MACHINE FOR YOUR NEEDS
CONTACT US