GREENLINE

PTH 500

GREENLINE Drum chippers

The smaller model of the 660 series of Pezzolato drum chippers.

This particular machine is ideal for those who produce wood chips as fuel for domestic heating systems, for agricultural tourism, hotels, greenhouses, schools, or for those who simply need to reduce the debris from pruning.

It can be fed manually or using a mechanical loader.

The entry of material is facilitated by a feed conveyor inside the hopper (on request a second feed conveyor can be supplied for the hopper tipper).

The combined action of the belt and upper roller facilitates the introduction of bulk material, even using mechanical loaders.

Routine maintenance and the replacement of knives can be perfermed extremely quickly and easily thanks to the “total” lifting of the feed roller.


TECHNICAL DATA PTH 500
Minimum tractor power hp/kW 80/60
Maximum power of the tractor hp/kW 150/112
Max chipping diameter soft wood mm/in 400 mm / 15.75''
Max chipping diameter hard wood mm/in 300 mm / 11.81''
Maximum inlet passage mm/in 500 x 400 mm / 19.69 x 15.75''
Knives 2 - 3
Hourly throughoutput m³/h 20 ÷ 30
Drum diameter mm/in 660 mm / 25.98''
Drum width mm/in 480 mm / 18.90''
Hooked steel feeding conveyor width mm/in 500 mm / 19.69''
Hooked steel feeding conveyor lenght mm/in 550 mm / 21.65''
Weight kg/lbs 3200 kg / 7055 lbs

VIDEO GALLERY


Driven by PTO tractor, 130 Hp power

Driven by PTO tractor, 135 Hp power

Driven by PTO tractor, 100 Hp power

Driven by PTO tractor, 160 Hp power

Driven by PTO tractor, 130 Hp power

EXTRAS AND CONFIGURATIONS

DISCHARGE BELT

Discharge belt, to obtain betterquality chips

FORESTRY CRANES

Forestry cranes, with or without cabin, in customised configuration

HOPPER EXTENSION

Hydraulically folding hopper extension, to easily introduce certain types of wood

RADIO OR CABLE REMOTE CONTROL

Radio or cable remote control, to manage the chipper's main activities at a distance

LOW-OR HIGH-SPEED TOWING TRAILER

Low- or high-speed towing trailer, with air or hydraulic brakes

C-SHAPED WOOD-SPLITTER

C-shaped wood-splitter with or without chain saw

SIEVING GRIDS

Sieving grids for chip calibration with different sizes, easy to replace

PULLEY-BELT DEVICE

Pulley-belt device between cardan shaft and drum, lowering the height of the cardan at 60 cm from the ground

HYDRAULIC TRACTION

Hydraulic traction, to easily move the machine in impervious paths

HOPPER WITH FEEDING CHAIN

Hopper with feeding chain, hydraulic drive, to increase the aggressiveness of the machine feeding.

SECURITY BAR

Removable security bar, for hand feeding

Electronic controller with 5" "touch screen" panel

Other extras and configurations

-  TELESCOPIC LEGS

Telescopic legs enable transportation of the chipping unit on several vehicles

-  INTEGRATED CONTAINER

Integrated container, with hydraulic pivoting, to collect chips where there is difficult access for other vehicles

-  CHARGING ROLLERS

Charging rollers to ease the introduction of certain types of wood for stationary machines

-  NO STRESS ELECTRONIC DEVICE

NO STRESS electronic device, available on all standard machines, automatically regulating the in-feed of material according to the available power

-  HOOK-LIFT SYSTEM

Hook-lift system

-  HYDRAULIC ORIENTATION DISCHARGE TUBE

Hydraulic orientation (deflector rotation and direction) discharge tube

-  Wear–resistant Hardox metal sheets for discharging fan

INFORMATION REQUEST


Address*
City*
Province*
ZIP*



> DRIVES AVAILABLE FOR THIS MODEL
Power take off tractorAutonomous motorElectric motor
> IN EVIDENCE

80 hp / 60 kW
Minimum required tractor power

400 mm / 15.75''
Maximum chipping diameter

500 x 400 mm / 19.69 x 15.75''
Maximum inlet passage
> DRIVES AVAILABLE FOR THIS MODEL
Power take off tractorAutonomous motorElectric motor

DO YOU NOT KNOW WHICH MODEL IS SUITABLE FOR YOUR NEEDS?
REQUEST A COMMERCIAL SUPPORT TO IDENTIFY THE MOST SUITABLE MACHINE FOR YOUR NEEDS
CONTACT US