PTH 1400/1000 HACKERTRUCK is one of the heavy duty machines within Pezzolato drum chippers, whose drum diameter measures 1000 mm (3′ 3.37”). Its feeding mouth is 1400 mm (4′ 7.12”) wide.
Able to produce up to 300 m3 chips per hour, it guarantees high throughput.
The HACKERTRUCK version is mounted on trucks with 3 or 4 axles and is characterized by high power and performance combined with great maneuverability and versatility. In HACKERTRUCK version the drive system uses the same engine as the truck in order to eliminate the auxiliary one so as to save fuel costs and unburden the vehicle. It can be customized with many settings to make them more versatile in all working conditions and is therefore appreciated by large contractors who have to move quickly on many different sites.
Thanks to the closed drum, it produces high quality chips, whatever wood is cut, considerably reducing fuel consumption.
The sharp cut through the blades and the drum’s inertia reduce the machine’s efforts and stress, thus confirming the well-known solidity of Pezzolato drum chippers.
The wear parts of all machines are simple to replace in short maintenance times and cheap.
The electronic controller suggests any ordinary and extraordinary maintenance operations to be performed according to the manufacturer’s maintenance plan.
|TECHNICAL DATA||PTH 1400/1000|
|Diesel engine power||hp/kW||500-650 hp / 367-478 kW|
|Max chipping diameter soft wood||mm/in||800 mm / 31.50''|
|Max chipping diameter hard wood||mm/in||550 mm / 21.65''|
|Maximum inlet passage||mm/ft||1400 x 1100 mm / 4' 7.12'' x 3' 7.31''|
|Hourly throughoutput||m³/h||until 300|
|Drum diameter||mm/ft||1000 mm / 3' 3.37''|
|Drum width||mm/ft||1400 mm / 4' 7.12''|
|Hooked steel feeding conveyor width||mm/ft||1400 mm / 4' 7.12''|
|Hooked steel feeding conveyor lenght||mm/ft||2200 mm / 7' 2.61''|
|Hopper width||mm/ft||2200 mm / 7' 2.61''|
Driven by SCANIA truck's engine, 730 Hp power
Driven by SCANIA truck's engine, 580 Hp power
Reduced track improves handling characteristics allowing possibly to travel those forest tracks not normally accessible by vehicles of this type.
Radiator for the coolant increased to reduce overheating of the motor and positionated externally to allow for a quick cleaning while working in a stationary position.
LCD COLOR DISPLAY AND EXPECTIVE CAMERAS
LCD color Display and inspection camera
Sieving grids for chip calibration with different sizes, easy to replace
It transfers the truck power to the chipper with maximum torque of 2500 Nm
Special drum to produce extra size chips: it improves production capacity 15% and reduces fuel consumption 16%
HYDRAULICALLY BENDING HOPPER
Hydraulically bending hopper, to chip very long wood
C-shaped wood-splitter with or without chain saw
The chips expulsion fan with continuous speed regulation allows adjusting the speed to the real necessities, decreasing energy need.
Forestry cranes, with or without cabin, in customised configuration
Discharge belt, to obtain betterquality chips
RECOVERING COLLECTING SCREWS
Recovering collecting screws, under the lower feeding roller, to keep the working area clean
MACHINE SET UP ON A TRUCK WITH 3 AXLES
MACHINE SET UP ON A TRUCK WITH 4 AXLES
Supplementary tube to eject the chips in front of the cab of the truck in limited spaces.
- BALCK-BOX CONTROL
Black-box control to capture data on site and transfer directly to a central information point
Hygrometer to continuously measure the humidity of the wood chips and allow an immediate qualitative assessment of the product.
- REVERSIBLE FANS FOR RADIATOR CLEANING
Reversible fans for radiator cleaning, to clean the motor radiator and save fuel
DO YOU NOT KNOW WHICH MODEL IS SUITABLE FOR YOUR NEEDS?
REQUEST A COMMERCIAL SUPPORT TO IDENTIFY THE MOST SUITABLE MACHINE FOR YOUR NEEDS