GREENLINE

PTH 1000/820

GREENLINE Drum chippers

PTH 1000/820 is one of the heavy duty machines within Pezzolato drum chippers, whose drum diameter measures 820 mm (32.28”). Its feeding mouth is 1000 mm wide (3′ 3.37”).

Able to produce up to 150 m3 chips per hour, it guarantees high throughput.

Thanks to the closed, it produces high quality chips, whatever wood is cut, considerably reducing fuel consumption.

The sharp cut through the blades and the drum’s inertia reduce the machine’s efforts and stress, thus confirming the well-known solidity of Pezzolato drum chippers.

The wear parts of all machines are simple to replace in short maintenance times and cheap.

The electronic controller suggests any ordinary and extraordinary maintenance operations to be performed according to the manufacturer’s maintenance plan.

Chipping dimeter and declared production are variable according to the available power, wood type and chips size.


TECHNICAL DATA PTH 1000/820
Diesel engine power hp/kW 408-700 hp / 304-515 kW
Max chipping diameter soft wood mm/in 600 mm / 23.62''
Max chipping diameter hard wood mm/in 450 mm / 17.72''
Maximum inlet passage mm/in 1000 x 900 mm / 3' 3.37'' x 35.43''
Knives 4 - 8
Hourly throughoutput m³/h until 150
Drum diameter mm/in 820 mm / 32.28''
Drum width mm/ft 1000 mm / 3' 3.37''
Hooked steel feeding conveyor width mm/ft 1000 mm / 3' 3.37''
Hooked steel feeding conveyor lenght mm/ft 2200 mm / 7' 2.61''
Weight kg/lbs 15000 kg / 33069 lbs

VIDEO GALLERY


Driven by IVECO engine, 510 Hp power

Driven by CATERPILLAR C15 engine, 540 Hp power

Driven by SCANIA DC12 engine, 430 Hp power

EXTRAS AND CONFIGURATIONS

TELESCOPIC LEGS

Telescopic legs enable transportation of the chipping unit on several vehicles

ROTATING THRUST BLOCK

Rotating thrust block (fifth wheel), to feed the machine right or left hand

TRACKS

Tracks to drive the machine in roush terrain

RECOVERING COLLECTING SCREWS

Recovering collecting screws, under the lower feeding roller, to keep the working area clean

LCD COLOR DISPLAY AND EXPECTIVE CAMERAS

LCD color Display and inspection camera

SIEVING GRIDS

Sieving grids for chip calibration with different sizes, easy to replace

SPECIAL DRUM

Special drum to produce extra size chips: it improves production capacity 15% and reduces fuel consumption 16%

DRIVE-LINE HOPPER

Drive-line hopper, to feed the machine with voluminous material

C-SHAPED WOOD-SPLITTER

C-shaped wood-splitter with or without chain saw

HYDRAULIC FAN

The chips expulsion fan with continuous speed regulation allows adjusting the speed to the real necessities, decreasing energy need.

LOW-OR HIGH-SPEED TOWING TRAILER

Low or high-speed towing trailer, with air or hydraulic brakes

FORESTRY CRANES

Forestry cranes, with or without cabin, in customised configuration

DISCHARGE BELT

Discharge belt, to obtain betterquality chips

MACHINE SET UP ON A TRUCK WITH 4 AXLES

HYDRAULIC TRACTION

Hydraulic traction, to easily move the machine in impervious paths

Other extras and configurations

-  INTEGRATED CONTAINER

Integrated container, with hydraulic pivoting, to collect chips where there is difficult access for other vehicles

-  REVERSIBLE FANS FOR RADIATOR CLEANING

Reversible fans for radiator cleaning, to clean the motor radiator and save fuel

-  MOUNT ON FORESTRY MOUNT ON FORESTRY TRAILERS AND FORWARDERS

PTO and Diesel Engine powered chippers are available to mount on Forestry trailers and forwarders.

INFORMATION REQUEST


Address*
City*
Province*
ZIP*



> DRIVES AVAILABLE FOR THIS MODEL
Power take off tractorAutonomous motor
> IN EVIDENCE

408-700 hp / 304-515 kW
Diesel engine power

600 mm / 23.62''
Maximum chipping diameter

1000 x 900 mm / 3' 3.37'' x 35.43''
Maximum inlet passage
> DRIVES AVAILABLE FOR THIS MODEL
Power take off tractorAutonomous motor

DO YOU NOT KNOW WHICH MODEL IS SUITABLE FOR YOUR NEEDS?
REQUEST A COMMERCIAL SUPPORT TO IDENTIFY THE MOST SUITABLE MACHINE FOR YOUR NEEDS
CONTACT US